Thinklogical Velocitykvm T-4200 Chassis Manual Instrukcja Użytkownika Pobierz pdf (Strona 12)

T-4200 Chassis, Rev. A 12 September 2011

Display Modifiable Description

*PS2 Devices

PS2 KB Scan NO Value of 1, 2 or 3 for the scan code. 0= not properly

connected to the CPU.

PS2 Mouse Mode NO Value of 0, 3 or 4 for the mode. 255= mouse not properly

connected to the CPU.

Display Modifiable Description

*USB Country Code

USB Country NO The country code of the USB KB that the unit reports itself as

being. This is the last USB KB country applied to the remote

host. Most hardware is not localized and thus this value

would be zero (0), which is displayed as “Not Supported”

USB Device Enum NO A bit pattern that indicates which ports have been enumerated

at the Velocity device side. The bits are laid out as Bit0=KB,

Bit1=MS, Bit2=TBLT, Bit3=DWNLD, Bit4=Daughter Card_KB,

Bit5=Daughter_MS, Bit6=Daughter_TBLT.

Display Modifiable Description

*DDC

DDC PROM Emula. Mode YES Options are Dynamic, Static and Passthru.

In Dynamic mode, the DDC of the monitor connected to the

RX is read and stored on the TX. The CPU is informed of a

change in DDC and the monitor is read. This is useful when

the CPU can be turned on without a connection to the RX.

Static mode is used to maintain the current DDC regardless

of monitor changes at the RX.

Passthru mode makes the DDC pins look like direct

connections between the TX and RX, allowing the computer

to talk directly to the monitor.

Load Default DDC YES Loads the default DDC stored in the application which allows

1024x768. This puts the TX into static mode.

Acquire DDC YES Gets the DDC table of the unit attached, stores the

information and puts the TX in static mode.

Force DDC Mode YES Used to force the DDC of a monitor to appear either digital or

analog. Since Velocity products can convert between analog

and digital, sometimes the DDC has to be modified to match

the method of connecting the TX to CPU.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Brak uwag

Thinklogical Velocitykvm T-4200 Chassis Manual Instrukcja Użytkownika Strona 12